Interior
Note: Roll your cursor over the orange spots or see list below.
-
Front Seat Belt Kit (Sold Each) Blue
AUD $109.00Front Seat Belt Kit (Sold Each) Blue VW Type 2 & Type 25 August 1950 to November 1990 Transporter auto front seat belt in blue. Webbing length retractor to end bkt 314cm. Please note that for safety reasons we are not able to assist with any warranties or returns for this item. Any questions or problems need to be addressed directly to the manufacturers on 01494 434455 Learn MorePart Number: J12008
-
Pair of Rear Side Panels (In 3mm Plain MDF Pre-Cut For DIY Covering)
AUD $31.50Pair of Rear Side Panels In 3mm Plain MDF Pre-Cut For DIY Covering Type 25 June 1979 to November 1990 Will not fit double sliding door vans Needs 26 clips per pair Learn MorePart Number: J12432
-
2 Piece Dash Tidy Type (Left Hand Drive)
AUD $83.40Available on Backorder
2 Piece Dash Tidy Type 25 June 1979 to November 1990 Left Hand Drive These were the original dash tidys as supplied by VW in the 1980's. They are made from 3mm ABS plastic using a sturdy 2 piece construction and come with all fittings. Makes good use of the space on the dash for storing pens, CDs, and drinks cans etc. Not suitable for vehicles with fully padded dashboard. Makes good use of the dashboard space Made from black 3mm ABS plastic Comes with ALL fittings ***NOT FOR FULLY PADDED DASH*** Learn MorePart Number: J13123
-
Interior panel bundle kit (single colour) 'trim only'
AUD $955.00Available on Backorder
Special Order Newton Panel Kit, T25 Early style with no cut out at the rear (Single Colour) TRIM ONLY T25 Early model individual panels in vinyl material with foam underlay attached to board. Plain design Early style with no rear cut-out on sliding door panel. Learn MorePart Number: J15226
-
Interior panel bundle kit (single colour)
AUD $1,590.00Available on Backorder
Special Order Newton Panel Kit, T25 Early style with no cut out at the rear (Single Colour) BUNDLE KIT T25 Early model full panel kit in vinyl material with foam underlay attached to board. Plain design. Early style with no rear cut-out on sliding door panel. Learn MorePart Number: J15222
-
Gasket for Window Winder Handle on Beetle, T2 Bay and T25
AUD $1.60Gasket Behind Window Winder Handle Type 2 Beetle & Type 25 August 1967 to November 1992 Each This small gasket for the window winder fits between the door handle and the interior trim on the T2 Bay and T25 and on all Beetles from 1967 onwards. Learn MorePart Number: J10834
-
Cap for Sliding Door Inner Handle on VW T2 Bay 1967-1979 and T25 1979-1992
AUD $3.70Cap For Sliding Door Inner Handle Type 2 and Type 25 August 1967 to November 1992 (Only fits genuine handle) This OEM cap for the sliding door inner handle covers the handle screw and fits all VW T2 Bay and T25 vans with original inner handles. Please note that this part will not fit some aftermarket inner handles - it fits only the genuine original inner handle. Learn MorePart Number: J11028
-
Deluxe Headlining Kit (T25)
AUD $352.00Type 25 Deluxe Headlining Kit This Deluxe headlining kit fits all T25 s form 1979 to 1992. The headliner is patterned after a Caravelle style interior and covers the roof and side pillars. Made in a original style perforated off white material but is also available in grey or beige / cream fleck ( please state colour choice when ordering) The kit is supplied with a fitting CD and associated notes. Learn MorePart Number: J18656
-
Rock and Roll Seat Brackets (Pair)
AUD $118.80Rock and Roll Seat Brackets (Pair) Fits Split, Type 2 and Type 25 (Will Fit Others With Modification) Learn MorePart Number: J11561
-
Just Kampers Front Door Cards (Black / T25)
AUD $133.80T25 Front Door Cards Pair in Black T25 Cab door cards. Fits all models from 1980 onwards. Sold as a pair. Colour: Black Learn MorePart Number: J18598
-
Panel Opposite Sliding Door (In 3mm Plain MDF Pre-Cut For DIY Covering)
AUD $24.90Panel Opposite Sliding Door In 3mm Plain MDF Pre-Cut For DIY Covering Type 25 June 1979 to November 1990 Needs 20 clips Learn MorePart Number: J12430
-
Sliding Door Panel (Early Style With No Cut Out At The Rear / In 3mm Plain MDF)
AUD $22.00Sliding Door Panel (Early Style With No Cut Out At The Rear) In 3mm Plain MDF Type 25 June 1979 to November 1990 There are 2 styles: J12828 for early vans with no cutout at the rear of the door and J12429 for later vans with a cutout at the rear of the door. Plain door cards pre cut ready for you to cover in the material of your choice Needs 13 clips Learn MorePart Number: J12828
-
Spare Spring (Rock & Roll Bed Bracket)
AUD $3.30Rock and roll bed bracket spare spring Learn MorePart Number: J14249
-
Full Width Rock & Roll Bed Vinyl Covers
AUD $486.05Available on Backorder
Type 25 Full Width Rock & Roll Bed Vinyl Covers A 3 part set of vinyl covers for the T25 3/4 width rock and roll bed. Please confirm sizes when ordering if NOT ordering new foams Learn MorePart Number: J18330
-
Door Step Rubber (Nearside/Left) for T25 1979-1992
AUD $10.80Door Step Rubber Type 25 June 1979 to November 1990 Nearside (Left) Take pride in your 'front step' with this excellent reproduction rubber which fits to the nearside front wheelarch step of your van. Don't forget to order another for the other side. Fits all T25, 1979-1992. Learn MorePart Number: J10703
-
Illuminated Cigar Lighter (12v) for all VW models
AUD $10.60Illuminated Cigar Lighter 12V Easy to install, this 12v, illuminated cigar lighter has a socket which can be used to power satnavs, mobile phone chargers etc. - and of course, to light that celebratory cigar! Learn MorePart Number: J10920
-
Black Trim Clips for T25 1979-1992
AUD $2.50Black Trim Clip (Push In) X5 Sold in packs of 5, these black trim clips for T25 1979-1992 are push-in style and are used in some T25 models to retain interior trim panels. Learn MorePart Number: J11303
-
3 Part Foam Set For 3/4 Width Bed 123cm Wide Type 25 June 1979 to November 1990
AUD $308.72Available on Backorder
3 Part Foam Set For 3/4 Width Bed 123cm Wide Type 25 June 1979 to November 1990 Made from flame retardant foam, these are ready cut to match our rock & roll beds and just require covering. Note: If you are fitting rear seatbelts, these seltbelts will be useless unless you fix your foam to the seat base. . . be warned! Foam density is V33H 1223mm x 440mm x 80mm 1224mm x 490mm x 80mm 1620mm x 918mm x 80mm PLEASE ALLOW 2-3 WEEKS FOR DELIVERY PLEASE ALLOW 3 WEEKS FOR DELIVERY Learn MorePart Number: J12654
