Clutch & Transmission

Items: 1 to 18 of 63

Page:
  1. 1
  2. 2
  3. 3
  4. 4

List  Grid 

  1. j10797

    Clutch Slave Cylinder Repair Kit for T25 1979-1992

    AUD $10.20

    Available on Backorder

    Clutch Slave Cylinder Repair Kit Type 25 June 1979 to November 1992 If there are signs of a fluid leak from your clutch slave cylinder, or there's a spongy feel to your clutch pedal, it could be time to replace the seals on your slave cylinder. This kit contains a new piston seal, dust boot and bleed nipple cover. Learn More

    Part Number: J10797

  2. j11701

    Shift Bracket

    OEM Product
    AUD $108.90

    Shift Bracket Type 25 June 1979 to November 1990 This is an OEM part Learn More

    Part Number: J11701

  3. j10890

    Shift Rod Boot for T25 1979-1982

    AUD $8.80

    Available on Backorder

    Boot For Shift Rod Type 25 May 1979 to December 1982 1600-2000cc This JK Exclusive shift rod boot fits onto the rear gear linkage and helps prevent dirt and dust contaminating the gear rods. Fits T25, 1979-1982. Learn More

    Part Number: J10890

  4. j10899

    Bellows For Shift Rod on T25 1979-1992

    OEM Product
    AUD $18.00

    Bellows For Shift Rod Type 25 June 1979 to November 1992 This OEM bellows for the shift rod fit all T25 vans with manual gearboxes, 1979-1992. It fits over the rear linkage bush (J10893) and is clamped in place by the flanges (J10892). Sold individually, 2 are required per vehicle Learn More

    Part Number: J10899

  5. j10897

    Circlip for T2 Sliding Door Hinge and T25 Gear Linkage Pin

    OEM Product
    AUD $0.61

    Circlip For Sliding Door Hinge Locking Lever & Gear linkage Pin Type 25 June 1979 to November 1990 This OEM circlip performs 2 different functions on 2 different vehicles. On VW T2 Bays, 1967-1979, it fits the sliding door locking lever, securing the locking lever pin into the roller bracket. On VW T25s, the circlip is used on the gear linkage to hold the link pin in place. 2: Fits T25 gear linkage pins. 2 are required for this fitment as they secure the pins through the joint between the front and rear linkage shafts. This is an OEM part Learn More

    Part Number: J10897

  6. CV Joint Only Type 2 & Type 25 August 1967 to November 1990

    CV Joint Only Type 2 & Type 25 August 1967 to November 1990

    AUD $59.90

    Available on Backorder

    CV Joint Only Type 2 & Type 25 August 1967 to November 1990 Learn More

    Part Number: J17036

  7. j10905

    Support Plate for Gear Linkage on VW T25 1979-1992

    OEM Product
    AUD $19.80

    Plate For Gear Linkage (Petrol Models Only) Type 25 June 1979 to November 1992 This Original Equipment quality support plate for the gear linkage fits all VW T25 models with manual gearboxes, 1979-1992. It fits to the side of the gearbox and holds the rear shiftrod bush and flanges. Learn More

    Part Number: J10905

  8. Gearbox Mounting Bush T25 (fits Petrol models not Automatic or 2.1 Engines) (Single)

    Gearbox Mounting Bush T25 (fits Petrol models not Automatic or 2.1 Engines) (Single)

    AUD $70.74

    Available on Backorder

    Gearbox Mounting Bush T25 (fits Petrol models not Automatic or 2. 1 Engines) (Single) Powerflex gearbox mount for T25 petrol with manual gearbox fits all apart from 2. 1 Replace your old worn soft bushes for these high performance Powerflex bushes. Made from polyurethane these offer a more positive location to your gearbox helping to eliminate axle tramp and gearbox movement under hard acceleration. Learn More

    Part Number: J19273

  9. j11193

    Autobox Sump Gasket for T2 1976-1979 and T25 1979-1992

    OEM Product
    AUD $63.50

    Available on Backorder

    Autobox Sump Gasket Type 2 & Type 25 August 1976 to November 1990 This autobox sump gasket for T2, 1976-1979, and T25, 1979-1992, is a genuine OEM quality part and fits the automatic gearbox on these models. You'll need one if your autobox is leaking or if you need to change your gear oil. Learn More

    Part Number: J11193

  10. j10235

    Clutch Cable With Front Conduit for T25, 1979-1982

    AUD $34.90

    This quality GEMO product - length 3890mm - fits all righthand drive T25s from June 1979-1982. It comes supplied as a complete cable with the front conduit. After 1981, Type 25s have a hydraulic clutch, so no cable is needed for them. GEMO, a trusted German manufacturer of control cables, is a leading supplier of original equipment and spare parts to the automotive industry. Working to stringent VDA standards (the Association of German Automobile Manufacturers), it produces cables renowned for lasting longer than the average. Learn More

    Part Number: J10235

  11. CV Joint and Rack Grease (90g) for T2 and T25 - J10651

    CV Joint and Rack Grease (90g) for T2 and T25

    AUD $3.00

    CV Joint / Steering Rack Grease 90G If you're changing a split CV or steering rack boot, it's advisable to clean out and replace the grease at the same time. This Febi quality, high temperature molybdenum grease is formulated to the orginal VW specification and fits all T2 and T25. One pack is sufficient to repack one CV or steering joint. German manufacturer Febi Bilstein focuses on producing Original Equipment quality products and is one of the world's largest suppliers of car and vehicle spare parts for the independent aftermarket. Learn More

    Part Number: J10651

  12. Driveshaft Bolt Splined Hex Tool for IRS Beetle, T2 Bay and T25 Models - J11237

    Driveshaft Bolt Splined Hex Tool for IRS Beetle, T2 Bay and T25 Models

    AUD $13.90

    Drive Shaft Bolt Hex Tool This driveshaft bolt splined hex tool for IRS Beetle, T2 Bay and T25 models is designed for removing the CV bolts. It features an 8mm spline with 3/8 drive and fits only CV bolts with a hex drive. Some CV bolts need an Allen key instead - please check that your CV bolts are compatible before ordering. This tool fits IRS Beetles 1967-1998, T2 1967-1979, and on T25 1979-1992. Learn More

    Part Number: J11237

  13. j10710

    Clutch Master Cylinder for T25 1980-1992

    AUD $59.90

    Clutch Master Cylinder Type 25 May 1979 to November 1992 Problems engaging gears? It may be a faulty or leaking master cylinder. This replacement cylinder fits all T25s from 1980-1992. Learn More

    Part Number: J10710

  14. j11503

    Wheel Bearing Kit (Rear)

    AUD $50.60

    Available on Backorder

    Wheel Bearing Kit Rear Type 2 & Type 25 Including Syncro August 1971 to November 1990 (1 kit per side) Complete rear wheel bearing kit. Fits Bay windows from 1971 onwards and all T25 models. (Pin not included) Learn More

    Part Number: J11503

  15. j10841

    Selector Shaft Seal for Manual Gearbox on T25 1985-1992

    OEM Product
    AUD $14.30

    Sealing Bush On Gearbox Manual Gearboxes Type 25 August 1985 to November 1992 This selector shaft seal for manual gearbox on T25, 1985-1992, is an OEM quality product. Learn More

    Part Number: J10841

  16. j13458

    Gear Stick Extension (M14 Threads)

    AUD $16.50

    Gear Stick Extension M14 Threads Only fits T25 Learn More

    Part Number: J13458

  17. j10893

    Gear Linkage Bush for T25 1979-1992

    AUD $11.80

    Gear Linkage Bush Type 25 June 1979 to November 1992 A sloppy gear change on your VW T25, 1979-1992, could be due to worn gear linkage bushes. Sold singly, 2 are required per vehicle and you may also need J10892 and J10899 when fitting. Learn More

    Part Number: J10893

  18. j10904

    Gearshift Joint for VW T25 1979-1992

    OEM Product
    AUD $46.50

    Available on Backorder

    Gear Shift Joint Type 25 June 1979 to November 1990 This Original Equipment quality gearshift joint fits all VW T25 models with manual gearboxes, 1979-1992. Critical to the gear mechanism, it is located directly on the side of your gearbox. If it shows signs of wear, change it now. This is an OEM part Learn More

    Part Number: J10904

Items: 1 to 18 of 63

Page:
  1. 1
  2. 2
  3. 3
  4. 4

List  Grid